Migration of di(2-ethylhexyl) phthalate, diisononylcyclohexane-1,2-dicarboxylate and di(2-ethylhexyl) terephthalate from transfusion medical devices in labile blood products: A comparative study.

BACKGROUND AND OBJECTIVES: Polyvinyl chloride (PVC) plasticized with di(2-ethylhexyl) phthalate (DEHP) is a widely used material for medical transfusion devices. Not covalently bound to PVC, DEHP can migrate into blood products during storage. Recognized as an endocrine disruptor and raising concerns about its potential carcinogenicity and reprotoxicity, DEHP is gradually being withdrawn from the medical device market. Therefore, the use of alternative plasticizers, such as diisononylcyclohexane-1,2-dicarboxylate (DINCH) and di(2-ethylhexyl) terephthalate (DEHT), as potential candidates for the replacement of DEHP in medical transfusion devices has been investigated. The purpose of this study was to evaluate the quantity of PVC-plasticizers in the blood components according to their preparation, storage conditions and in function of the plasticizer. MATERIALS AND METHODS: Whole blood was collected, and labile blood products (LBPs) were prepared by the buffy-coat method with a PVC blood bag plasticized either with DEHP, DINCH or DEHT. DINCH and DEHT equivalent concentrations were quantified in LBPs by liquid chromatography-tandem mass spectrometry or coupled with UV and compared to DEHP equivalent concentrations. RESULTS: The plasticizer equivalent concentration to which a patient is exposed during a transfusion depends on the preparation of LBPs as well as their storage conditions, that is, temperature and storage time. At day 1, for all LBPs, the migration of DEHP is 5.0 and 8.5 times greater than DINCH and DEHT, respectively. At the end of the 49 days storage period, the DEHP equivalent concentration in red blood cells concentrate is statistically higher when compared to DINCH and DEHT, with maximal values of 1.85, 1.13 and 0.86 µg/dm2 /mL, respectively. CONCLUSION: In addition to lower toxicity, transfused patients using PVC-DEHT or PVC-DINCH blood bags are less exposed to plasticizers than using PVC-DEHP bags with a ranging exposure reduction from 38.9% to 87.3%, due to lower leachability into blood components.

Heat-based transdermal delivery of a ramipril loaded cream for treating hypertension.

Angiotensin-converting enzyme (ACE) inhibitors play an important role in the development of anti-hypertension approaches, with ramipril being one of the most widely used ACE inhibitor prodrugs orally administered once or twice a day. Due to its low bioavailability, large amounts have to be administered to obtain a therapeutic effect. In this work, we propose a ramipril loaded pharmaceutical formulation in contact with an electrothermal actuator based on a gold nanohole array as an efficient approach to increase the transdermal ramipril flux. Using rats as an in vivo model, the effect on the systolic and diastolic blood pressure is evaluated, showing that under optimized conditions the blood pressure could be regulated. Heat activation resulted in total drug delivery out of a bandage loaded with 1 mg ramipril, revealing a flux of 50.9 ± 2.8 µg cm-2 h-1. Importantly, heat-based transdermal dispensing allowed efficient and rapid delivery of ramipril in spontaneously hypertensive rats, with its active form (ramiprilat) detected in blood as early as 5 minutes after delivery onset, accompanied by significant decrease in blood pressure.

Impact of the pathogen inactivation process on the migration of di(2-ethylhexyl) phthalate from plasma bags.

BACKGROUND AND OBJECTIVES: Di(2-ethylhexyl) phthalate (DEHP) is a toxic plasticizer that is commonly used in the manufacture of polyvinyl chloride (PVC) blood bags. It is well known that DEHP can migrate from a medical device into the blood plasma. For safety reasons, pathogens in plasma must be inactivated; however, this process may increase DEHP migration. Here, we assessed the impact of illumination-based pathogen inactivation on the migration of DEHP from PVC bags into plasma. MATERIALS AND METHODS: Pairs of native PVC-DEHP plasma bags were pooled. Each pool was then split into a pathogen-inactivated bag and a control bag. After illumination, the plasma concentrations of DEHP and its main metabolite (mono(2-ethylhexyl) phthalate, MEHP) in each bag were assayed and compared using liquid chromatography-tandem mass spectrometry. Concentrations were evaluated in repeated-measures, two-way analyses of variance. RESULTS: The MEHP concentration was significantly associated with storage but not with illumination (p = 0.0001). The DEHP concentration stayed constant throughout the storage period. The DEHP equivalent concentration (corresponding to the overall plasticizer migration rate into plasma) was not significantly associated with illumination (p = 0.3) or storage (p = 0.09; mean ± standard deviation of the mean DEHP concentration for all conditions: 147.9 ± 11.3 µg/ml). CONCLUSION: Illumination-based inactivation of pathogens in plasma did not increase the DEHP equivalent concentration, relative to control (non-inactivated) plasma.

Analysis of Phthalates and Alternative Plasticizers in Gloves by Gas Chromatography-Mass Spectrometry and Liquid Chromatography-UV Detection: A Comparative Study.

Gloves represent an essential feature for hand protection because it is a requirement in the professional framework to comply with both hand hygiene standards and the principles of good laboratory practice. Despite their wide use, there is a knowledge gap regarding their composition, including phthalates. The purpose of the present study was to develop two orthogonal methods, GC-MS and HPLC-DAD, for the screening of plasticizers in gloves. Performances of these two methods were compared in terms of ease of use, number of analyzed plasticizers, and sample preparation. The two methods were validated and applied for the identification and quantification of plasticizers in ten gloves made with different materials (vinyl, nitrile, latex, and neoprene). Results revealed the presence of three main ones: DEHP, DEHT, and DINP. Additionally, the contents of plasticizers were extremely variable, depending on the glove material. As expected, the results point out a predominant use of plasticizers in vinyl gloves with an amount that should be of concern. While DEHP is classified as a toxic substance for reproduction 1B, it was, however, quantified in the ten different glove samples studied. This study provides new data regarding the plasticizers' content in protective gloves, which could be useful for risk assessment.

Specification and Evaluation of Plasticizer Migration Simulants for Human Blood Products: A Delphi Study.

Potentially toxic plasticizers are commonly added to polyvinyl chloride medical devices for transfusion in order to improve their flexibility and workability. As the plasticizers are not chemically bonded to the PVC, they can be released into labile blood products (LBPs) during storage. Ideally, LBPs would be used in laboratory studies of plasticizer migration from the medical device. However, short supply (i.e., limited stocks of human blood in collection centres) has prompted the development of specific simulants for each type of LBP in the evaluation of new transfusion devices. We performed a Delphi study with a multidisciplinary panel of 24 experts. In the first (qualitative) phase, the panel developed consensus definitions of the specification criteria to be met by each migration simulant. Next, we reviewed the literature on techniques for simulating the migration of plasticizers into LBPs. A questionnaire was elaborated and sent out to the experts, and the replies were synthesized in order to obtain a consensus. The qualitative study established specifications for each biological matrix (whole blood, red blood cell concentrate, plasma, and platelet concentrate) and defined the criteria required for a suitable LBP simulant. Ten criteria were suggested: physical and chemical characteristics, opacity, form, stability, composition, ability to mimic a particular clinical situation, ease and safety of use, a simulant-plastic interaction correlated with blood, and compatibility with analytical methods. The questionnaire data revealed a consensus on the use of natural products (such as pig's blood) to mimic the four LBPs. Opinions diverged with regard to synthetic products. However, an isotonic solution and a rheological property modifier were considered to be of value in the design of synthetic simulants. Consensus reached by the Delphi group could be used as a database for the development of simulants used to assess the migration of plasticizers from PVC bags into LBPs.

Capillary electrophoresis as a versatile tool for quality control and epidermis permeation studies of transdermal formulations.

Capillary electrophoresis has been investigated to evaluate the performances of new transdermal formulations containing antiemetics. After optimization of the background electrolyte (sodium phosphate buffer (pH 2.5; 60 mM) containing 12% of ethanol (v/v)), domperidone, diphenhydramine, haloperidol, metoclopramide and promethazine were base-line resolved in 10 min. After hydrodynamic injection of the sample (0.5 psi for 7 s), the method was fully validated through the build of the accuracy profile. Trueness values ranged from -1.85 and 5.43% and relative standard deviation of intra-day and inter-day precision was lower than 6.20%. This method was found convenient for quality control of extemporaneous ready-to-use transdermal formulations with recoveries ranging from 91.2-107.8%. However, using hydrodynamic injection, limits of quantitation in the 0.3-2.6 µg.mL-1 range, were not low enough to evaluate the permeation rate of antimetics through epidermis. Field amplified sample injection was used to improve both sensitivity and quantitation thresholds. Several parameters (nature and concentration of the protonation agent, composition of the injected solvent, applied voltage and duration of the injection) have been optimized using a multivariate approach. In the optimized conditions, signal-to-noise ratios were improved by a 600- to 2000-fold factor, regarding the antiemetic. However, the presence of salts in the simulated body fluid solution, used as receptor medium to perform permeation kinetic study, was improper to allow the stacking effect. Therefore, a liquid-liquid extraction has been developed and applied on simulated body fluid solution. Finally, this new method has been shown strongly useful to evaluate the permeation kinetic of metoclopramide through pig epidermis.

Determination of the stoichiometry between a drug and its counter-ion by supercritical fluid chromatography using ultra-violet and evaporative light scattering detections: Application to ondansetron hydrochloride.

In this paper, a supercritical fluid chromatography method using ultra-violet and evaporative light scattering detections (SFC-UV/ELSD) has been developed and validated for the stoichiometry determination of an antiemetic drug with its counter-ion i.e. ondansetron hydrochloride. Seven stationary phases were first screened using a CO2-methanol-diethylamine mobile phase. Best conditions were determined using Derringer's desirability functions regarding chromatographic separation: selectivity, resolution, peak shape and runtime. The influence of co-solvent composition on resolution was evaluated. After optimization, best chromatographic results were obtained using 2-ethylpyridine stationary phase and a co-solvent composed of 0.2% diethylamine and 2% water in methanol. While ondansetron was quantified using UV detection (214 nm) and an external calibration curve, the determination of chloride was carried out using ELSD and an internal calibration curve. Then, the method was validated using the accuracy profile approach with a total error included in the ±10%. Finally, the proposed method was applied for the determination of the molar ratio between ondansetron and chloride. A value of 1.001 ± 0.003 demonstrated that the stoichiometry of this drug with its counter-ion was 1:1.

Simultaneous determination of di(2-ethylhexyl) phthalate and diisononylcyclohexane-1,2-dicarboxylate and their monoester metabolites in four labile blood products by liquid chromatography tandem mass spectrometry.

Di(2-ethylhexyl) phthalate (DEHP) is a common plasticizer that is largely used for PVC blood bags. The migration of DEHP from medical devices into labile blood products (LBP) is a well-known situation. While DEHP has beneficial effects on the storage of red blood cells, it can have toxicological impact due to its potential reprotoxic effects (classified group 1B). Since July 1st, 2015, the French law prohibits the use of tubing made in DEHP-plasticized PVC in paediatric, neonatal and maternity wards. This provision, which could extend in several years more widely to medical devices used for drugs infusion, dialysis, feeding and blood bags, has led manufacturers to replace DEHP to alternative plasticizers such as diisononylcyclohexane-1,2-dicarboxylate (DINCH). In this paper, a liquid chromatography-tandem mass spectrometry (LCMS/MS) method has been developed and validated for the determination of DEHP, DINCH and their corresponding monoester metabolites (MEHP and MINCH) in four labile blood products (LBP): whole blood (WB), red cells concentrate (RCC), plasma and platelet concentrate (PC). Due to strong contamination of blank LBP by DEHP because of its ubiquitous presence in working environment and despite the attention paid to avoid contamination of solvents and glassware, a trap chromatographic column was implemented between the solvent mixing chamber and the injector of the LC system. This set-up permitted to discriminate DEHP present in the sample to DEHP brought by the environmental contamination. In the optimized conditions, all compounds were separated in less than 10 min. The analytes were extracted from LBP samples using a liquid-liquid extraction. After optimization, recoveries were ranged from 47 to 96 %, depending on the analytes and the nature of LBP. Except for DEHP which exhibited RSD values of intermediate precision higher than 20 % at a concentration of 25 nM, all the precision results (repeatability and intermediate precision) were lower than 16 % and trueness values ranged from -16.2-19.8%. Using the validated method, the leachability of DEHP and DINCH from corresponding PVC-blood bags was investigated and the concentrations of their corresponding metabolites, MEHP and MINCH, were determined in whole blood, red cells concentrate, plasma and platelet concentrate.

Determination of acetaminophen and its main metabolites in urine by capillary electrophoresis hyphenated to mass spectrometry.

In this study, a capillary electrophoresis-tandem mass spectrometry method combining efficient separation and sensitive detection has been developed and validated, for the first time, to quantify acetaminophen and five of its metabolites in urine samples. Optimization of the method has led us to perform detection in positive ESI mode using MeOH-ammonium hydroxide (0.1%) (50:50, v/v) as sheath liquid. Moreover, optimal separation has been obtained in less than 9 min after anodic injection, using an ammonium acetate solution (40 mM, pH 10) as BGE. It was shown that the dilution solvent and the dilution factor to use for sample preparation are critical parameters to avoid peak splitting, to gain in sensitivity and then to obtain an effective analysis method. While a 200-fold factor dilution was shown to be suitable for quantitation of acetaminophen, acetaminophen mercapturate, acetaminophen sulfate and acetaminophen glucuronide, a 20-fold dilution was finally selected for methoxy-acetaminophen and 3-methylthioacetaminophen analysis, thus requiring two successive analyses to be carried out in order to quantify all metabolites. Hyphenation of CE with MS/MS versus UV permits to improve LOQ (10-20-fold factor with respect to previous works for acetaminophen, acetaminophen sulfate and acetaminophen glucuronide). Moreover, use of CE versus HPLC, permits to quantify two additional metabolites, i.e. 3-methylthio-acetaminophen and methoxy-acetaminophen. The method has been validated using the accuracy profile approach with a total error (accuracy) included in the ± 20% range. Thereby, the method allows the quantitation of acetaminophen and acetaminophen mercapturate in the range (0.1-1 mg mL-1), and of acetaminophen sulfate, methoxy-acetaminophen, acetaminophen glutathione and 3-methylthio-acetaminophen in the ranges (0.5-5 mg mL-1), (0.025-0.4 mg mL-1), (9.22-30 mg mL-1) and (0.073-0.4 mg mL-1), respectively. The method was finally applied to the analysis of urine samples of eighteen patients belonging to three different inclusion groups of the ongoing clinical trial, demonstrating that the method is suitable to highlight different metabolic profiles. This work will be subsequently extended to the analysis two hundred and seventy urine samples from patients included in a clinical trial dedicated to the study of acetaminophen metabolism changes after hepatic resection.

Simultaneous determination of inorganic anions and cations by supercritical fluid chromatography using evaporative light scattering detection.

Supercritical fluid chromatography (SFC) is commonly used for the analysis of non-polar compounds, but remains poorly explored for the separation of polar and ionized molecules. In this paper, SFC has been investigated for the separation of 14 inorganic ions sampled in aqueous solutions. Four polar stationary phases were first screened using CO2-methanol-based mobile phases containing water or different acidic or basic additives, in order to select the most efficient conditions for the simultaneous retention of inorganic cations and anions and to favor their detection using evaporative light scattering detector (ELSD). Orthogonal selectivity was obtained depending on the stationary phase used: whereas anions are less retained on HILIC stationary phase, 2-ethylpyridine (2-EP) stationary phase exhibits strong interaction for anions. Best results were obtained under gradient elution mode using a 2-EP stationary phase and by adding 0.2% triethylamine in the CO2-methanol-based mobile phase. The composition of the injection solvent was also investigated. The results showed that a methanolic sample containing a percentage of water not exceeding 20% does not affect the analytical performances obtained on 2-EP. Moreover, the presence of triethylamine in the injection solvent contributes to eliminate peaks shoulders. Among the 14 inorganic ions tested, three cations (Li+, Ca2+ and Mg2+) and five anions (Cl-, Br-, NO3-, I-, SCN-) were totally resolved in 15 min. NO3- and NO2- still coeluted in the final optimized conditions. The other investigated ions were either strongly retained on the stationary phase or not detected by the ELSD.

Photothermally triggered on-demand insulin release from reduced graphene oxide modified hydrogels.

On-demand delivery of therapeutics plays an essential role in simplifying and improving patient care. The high loading capacity of reduced graphene oxide (rGO) for drugs has made this matrix of particular interest for its hybridization with therapeutics. In this work, we describe the formulation of rGO impregnated poly(ethylene glycol) dimethacrylate based hydrogels (PEGDMA-rGO) and their efficient loading with insulin. Near-infrared (NIR) light induced heating of the PEGDMA-rGO hydrogels allows for highly efficient insulin release. Most importantly, we validate that the NIR irradiation of the hydrogel has no effect on the biological and metabolic activities of the released insulin. The ease of insulin loading/reloading makes this photothermally triggered release strategy of interest for diabetic patients. Additionally, the rGO-based protein releasing platform fabricated here can be expanded towards 'on demand' release of various other therapeutically relevant biomolecules.

Transdermal skin patch based on reduced graphene oxide: A new approach for photothermal triggered permeation of ondansetron across porcine skin.

The development of a skin-mounted patch capable of controlled transcutaneous delivery of therapeutics through thermal activation provides a unique solution for the controlled release of active principles over long-term periods. Here, we report on a flexible transdermal patch for photothermal triggered release of ondansetron (ODS), a commonly used drug for the treatment of chemotherapy-induced nausea and vomiting and used as model compound here. To achieve this, a dispersion of ODS-loaded reduced graphene oxide (rGO-ODS) nanosheets were deposited onto Kapton to produce a flexible polyimide-based patch. It is demonstrated that ODS loaded Kapton/rGO patches have a high drug delivery performance upon irradiation with a continuous laser beam at 980nm for 10min due to an induced photothermal heating effect. The ability of ODS impregnated Kapton/rGO patches as transdermal delivery scaffolds for ODS across the skin is in addition investigated using porcine ear skin as a model. We show that the cumulative quantity and flux of ODS passing the skin are highly depending on the laser power density used. At 5Wcm-2 irradiation, the ODS flux across pig skin was determined to be 1.6µgcm-2h-1 comparable to other approaches. The use of tween 20 as skin enhancer could significantly increase the ODS flux to 13.2µgcm-2h-1. While the skin penetration enhancement is comparable to that obtained using other well-known permeation enhancers, the actual superiority and interest of the proposed approach is that the Kapton/rGO photoactivatable skin patch can be loaded with any drugs and therapeutics of interest, making the approach extremely versatile. The on demand delivery of drugs upon local laser irradiation and the possibility to reload the interface with the drug makes this new drug administration route very appealing.

Synthesis and Biological Evaluation of N-[2-(4-Hydroxyphenylamino)-pyridin-3-yl]-4-methoxy-benzenesulfonamide (ABT-751) Tricyclic Analogues as Antimitotic and Antivascular Agents with Potent in Vivo Antitumor Activity.

Benzopyridothiadiazepine (2a) and benzopyridooxathiazepine (2b) were modified to produce tricyclic quinazolinone 15-18 or benzothiadiazine 26-27 derivatives. These compounds were evaluated in cytotoxicity and tubulin inhibition assays and led to potent inhibitors of tubulin polymerization. N-[2(4-Methoxyphenyl)ethyl]-1,2-dihydro-pyrimidino[2,1-b]quinazolin-6-one (16a) exhibited the best in vitro cytotoxic activity (GI50 10-66.9 nM) against the NCI 60 human tumor cell line and significant potency against tubulin assembly (IC50 0.812 µM). In mechanism studies, 16a was shown to block cell cycle in G2/M phase and to disrupt microtubule formation and displayed good antivascular properties as inhibition of cell migration, invasion, and endothelial tube formation. Compound 16a was evaluated in C57BL/6 mouse melanoma B16F10 xenograft model to validate its antitumor activity, in comparison with reference ABT-751 (1). Compound 16a displayed strong in vivo antitumor and antivascular activities at a dose of 5 mg/kg without obvious toxicity, whereas 1 needed a 10-fold higher concentration to reach similar effects.

Synthesis of triazoloquinazolinone based compounds as tubulin polymerization inhibitors and vascular disrupting agents.

A series of 1-phenyl-[1,2,4]triazolo[4,3-a]quinazolin-5-ones designed as conformationally restricted CA-4 analogues, were tested for their tubulin polymerization and growth inhibitory activities. The 3-hydroxy-4-methoxy derivatives 11d and 12d are potent inhibitors of tubulin assembly but only the N-methylated amid counterpart 12d possesses potent anticancer activity in a large panel of cancer cell lines. Upon treatment with compound 12d, remarkable cell shape changes as cell migration and tube formation were elicited in HUVECs, consistent with vasculature damaging activity.

Comparison of high-performance liquid chromatography and supercritical fluid chromatography using evaporative light scattering detection for the determination of plasticizers in medical devices.

Recently, interest in supercritical fluid chromatography (SFC) has increased due to its high throughput and the development of new system improving chromatographic performances. However, most papers dealt with fundamental studies and chiral applications and only few works described validation process of SFC method. Likewise, evaporative light scattering detection (ELSD) has been widely employed in liquid chromatography but only a few recent works presented its quantitative performances hyphenated with SFC apparatus. The present paper discusses about the quantitative performances of SFC-ELSD compared to HPLC-ELSD, for the determination of plasticizers (ATBC, DEHA, DEHT and TOTM) in PVC tubing used as medical devices. After the development of HPLC-ELSD, both methods were evaluated based on the total error approach using accuracy profile. The results show that HPLC-ELSD was more precise than SFC-ELSD but lower limits of quantitation were obtained by SFC. Hence, HPLC was validated in the ± 10% acceptance limits whereas SFC lacks of accuracy to quantify plasticizers. Finally, both methods were used to determine the composition of plasticized-PVC medical devices. Results demonstrated that SFC and HPLC both hyphenated with ELSD provided similar results.

Pharmacokinetic evaluation of a novel benzopyridooxathiazepine derivative as a potential anticancer agent.

BACKGROUND/AIMS: The in vivo metabolic profile of a benzopyridooxathiazepine (BPT) derivative, a potent tubulin polymerization inhibitor with a promising in vitro activity, was investigated. METHODS: The quantification of the BPT derivative and the identification of metabolites in the plasma of Wistar rats after i.p. and oral administration of 10 mg/kg were performed by the HPLC-mass spectrometry method. RESULTS: Following a single i.p. dose of the BPT derivative, the plasma concentrations showed a biexponential decay (with a rapid decline) followed by a slow decay with a terminal half-life of 77.90 min. The area under the concentration-time curve from time 0 to infinity (AUC0-∞) was 18.90 µg/ml·min. After oral administration, the plasmatic concentrations reached a peak of 0.06 µg/ml at 35 min and then decayed with a half-life of 108 min. The AUC0-∞ was 10.25 µg/ml·min, representing 54.2% of the relative bioavailability. The compound was well distributed in the body, and its elimination seemed to be fast, regardless of the administration route. The major metabolic pathways were demethylation and hydroxylation reactions, both followed by conjugation with glucuronic acid. CONCLUSION: In rats, the BPT derivative is well distributed and undergoes extensive metabolism, leading to several metabolites. With promising in vitro activity and very good oral bioavailability, this compound seems to be an attractive candidate for further development as an anticancer agent.

Analysis of non-phthalates plasticizers on porous graphitic carbon by supercritical fluid chromatography using evaporative light scattering detection.

The analysis of several plasticizers, widely used in the production of medical devices, was investigated on porous graphitic carbon (PGC) stationary phase in supercritical fluid chromatography (SFC) with an evaporative light scattering detector (ELSD). Due to strong interaction of compounds with the PGC support, solvents of strong eluotropic strength were added to the CO2 supercritical fluid. The effect of alkyl chain (pentane, hexane, heptane) and chlorinated (CH2Cl2, CHCl3, CCl4) solvents was studied on the retention and on the ELSD detection of plasticizers. A co-solvent mixture composed of CHCl3/heptane, eluted under gradient mode, allowed a significant improvement of the ELSD response compared to the use of each solvent individually. Then, a central composite design (CCD) was implemented to optimize both the separation and the detection of plasticizers. The parameters involved were the outlet pressure, the gradient slope, the co-solvent composition and the drift tube temperature of the ELSD. After optimization, baseline separation of plasticizers was achieved in 7min and best signal-to-noise ratios were obtained with outlet pressure and drift tube temperature of ELSD set at 200bar and 31°C, respectively. The co-solvent mixture was also composed of CHCl3/heptane (35/65 v/v) and a gradient from 15 to 60% of co-solvent in 2.2min was employed. The results demonstrated that CCD is a powerful tool for the optimization of SFC/ELSD method and the response surface model analysis can provide statistical understandings of the significant factors required to achieve optimal separation and ELSD sensitivity.

Quantification of five plasticizers used in PVC tubing through high performance liquid chromatographic-UV detection.

Searching for alternatives to di-(2-ethylhexyl)-phthalate, a plasticizer that has been widely used in the manufacturing of PVC medical devices, has become a major challenge since a European regulation underlined some clinical risks. The aim of this study is to develop an HPLC-UV method to quantify the currently used alternative plasticizers to DEHP. Five plasticizers, acetyl tributyl citrate, di-(2-ethylhexyl)-phthalate, di-(ethylhexyl)-terephthalate, di-isononyl-1,2-cyclohexane-dicarboxylate, and trioctyl trimellitate, were separated on a C8 stationary phase (2.6 µm, 100 mm × 4.6mm) under gradient elution in 13 min. They were detected at 221 nm leading to a quantification threshold from 0.3 to 750 µg/mL as a function of the plasticizer. Within-day and between-day precisions were inferior to 0.9% and 18%, respectively. The assays were validated according to the accuracy profile method. Plasticizers were extracted from PVC-tubing by dissolving PVC in THF then precipitating it in methanol with a yield of over 90% for each plasticizer. This assay could feasibly be used to quantify plasticizers in PVC medical devices.

A chemometric approach to elucidate the parameter impact in the hyphenation of evaporative light scattering detector to supercritical fluid chromatography.

The aim of this work was to elucidate the effects of parameters influencing the evaporative light scattering detector (ELSD) response when it was coupled to supercritical fluid chromatography (SFC). Phthalates, currently used as plasticizers in medical devices, were selected as model compounds. The configuration of the hyphenation setup was firstly optimized and shown that both peak efficiency and sensitivity were improved by connecting the ELSD to the SFC before the back pressure regulator (BPR). By using a tee-junction which splits the flow after the PDA towards the collect fraction (or waste) and the ELSD, this instrument configuration has the advantage to be applicable for small-scale preparative SFC. The impacts of other parameters such as mobile phase composition and flow rate, outlet pressure, column oven temperature and ELSD drift tube temperature on the ELSD signal were evaluated using a chemometric approach. First, it was demonstrated that a classical mobile phase composed of CO2-methanol 90:10 (v/v) was suitable to obtain great nebulization efficiency. The flow rate of the eluent was the second main effect factor. The setting must be as low as possible to avoid the loss of large particle size in the drift tube resulting in a loss of signal intensity. Concerning the outlet pressure, the configuration of the setup between SFC and ELSD requires a setting as high as possible to limit the partial liquid-vapor separation of the mobile phase in the restrictor tube. Finally, due to the low quantity of solvent which must be evaporated in the detector, a drift tube temperature of 25 °C is suitable for the hyphenation of ELSD to SFC. In the optimized conditions, the proposed SFC/ELSD method could be suitable to quantify plasticizers in medical devices.

A validated micellar electrokinetic chromatography method for the quantitation of dexamethasone, ondansetron and aprepitant, antiemetic drugs, in organogel.

A micellar electrokinetic chromatography (MEKC) method was developed for the determination of three anti-vomiting drugs (aprepitant, dexamethasone and ondansetron) in pharmaceutical formulations. The method was optimized using a central composite design (CCD). Four main factors (borate buffer concentration, pH, methanol content and sodium dodecyl sulfate concentration) were optimized in order to obtain best resolutions and peak efficiencies in a minimum runtime. The separation was performed in a fused-silica capillary. After optimization, the background electrolyte consisted of a borate buffer (62.5mM, pH 8.75) containing sodium dodecyl sulfate (77.5mM) and methanol (3.75%). Under these conditions, a complete separation of each antiemetic drug and its respective internal standards was achieved in 38min. The method was validated with trueness values from 94.9 to 107.2% and precision results (repeatability and intermediate precision) lower than 5.9%. MEKC-UV was the first method allowing the separation of aprepitant, dexamethasone and ondansetron and was suitable for the quantitation of these three antiemetic drugs in organogel formulations. The rapid sample preparation coupled with an automated separation technique make this method convenient for quality control of extemporaneous magistral ready-to-use formulation.